Manufacturing and industrial

Australian Manufacturing Week 2027

An Australian manufacturing exhibition in Melbourne with product zones for machine tools, automation and manufacturing solutions.

Add to calendar Your list

May 11 to 14, 2027, Melbourne, Australia. Dates confirmed on the organizer's page: 2026-11-06. Recheck before you book, since organizers change details.

Independent planning reference. Delta Arc is not the organizer and does not sell tickets. Delta Arc has not announced attendance at this event, and listing it is not an endorsement.

What to see

  • The show is laid out in 6 product zones, including machine tools and robotics and automation. Source
  • The Australian Manufacturer's Pavilion showcases local precision engineering and component makers. Source

What to plan

  • The organizer has not published these pages yet. Check its site closer to the date.
  • Official site

These open in a new tab, so this page stays here. Your plan, travel details and next steps are all on Delta Arc.

Parking and the venue

Parking

Coming soon. Delta Arc will add this from an official source.

Transit

Coming soon. Delta Arc will add this from an official source.

Accessibility

Coming soon. Delta Arc will add this from an official source.

Where to stay

Coming soon. Delta Arc will add this from an official source.

Dining near the venue

Coming soon. Delta Arc will add this from an official source.

From the airport

Travel details for the Melbourne area.

Airports

Airport to the venue

MCEC suggests a taxi or rideshare from your terminal to the Convention Centre Place entrance, or the Skybus to Southern Cross Station, then a tram or a 10-minute walk to the Clarendon Street entrance. Source

Rideshare

Melbourne Airport has dedicated rideshare pick-up and drop-off areas for all terminals, and free pick-up and drop-off zones for T1, T2 and T3 in the T123 Transport Hub. Source

Taxis

Taxi ranks are close to all terminals. The airport warns not to accept taxi offers outside the designated ranks at Terminals 1, 2 and 4. Source

Black car and SUV pickup

Chauffeurs can be pre-arranged to meet you at any terminal, at the chauffeur meeting points inside the airport. Source

Public transit

The airport is served by public buses, Skybus and regional and charter buses. Source

Melbourne travel guide →

Questions worth asking there

A claim at a show is a starting point. These questions help you test it.

  • Was the cycle time or throughput figure measured on a customer part or on a demonstration part prepared for the show?
  • Which installed sites can confirm the uptime and maintenance figures, and over how many months?
  • What does the quoted energy or material saving compare against, and who measured it?

Common questions

When is Australian Manufacturing Week 2027?

May 11 to 14, 2027.

Where is Australian Manufacturing Week 2027 held?

Melbourne, Australia.

How do I get to Australian Manufacturing Week 2027 from the airport?

MCEC suggests a taxi or rideshare from your terminal to the Convention Centre Place entrance, or the Skybus to Southern Cross Station, then a tram or a 10-minute walk to the Clarendon Street entrance.

All the way through

Before, during and after

Before the show

Set the decision you want to improve, then plan the trip.

During the show

Test any claim on the floor, from your phone, in six questions.

After the show

Turn notes into a decision while they are fresh.

Where next

Stay with it

Understand

The evidence and sources in Manufacturing and Industrial Systems.

Plan

Shows and conferences in Manufacturing and Industrial Systems, with what to see and how to get there.

Build

How Delta Arc would approach the decision in front of you.

Everything in Manufacturing and Industrial Systems →

Also coming up

More in this field

Manufacturing and industrial

AIChE Annual Meeting 2026

The American Institute of Chemical Engineers' main yearly technical meeting for research and practice in the field.

November 8 to 12, 2026 · Minneapolis, MN

Manufacturing and industrial

Plastimagen México 2026

A plastics industry trade show in Mexico City with exhibitors across halls and an infield area.

November 10 to 13, 2026 · Mexico City, Mexico

Manufacturing and industrial

electronica 2026

An international electronics trade fair in Munich covering components, systems and applications.

November 10 to 13, 2026 · Munich, Germany

Plan it

Guides for any show

First time at a major show

A show floor rewards a plan. Decide what you need to learn before you see the program, then let the program fill the plan.

Show planning checklist

The same checklist works for a payments summit, a marketing conference and a machine tool show.

Parking and getting there

Parking and transit change by event and by day. The venue and the transit agency are the sources to trust, close to the date.

Hotels and travel

Use the organizer's official housing page as your starting point. Third-party offers that use a show's name are not always connected to the organizer.

During the show

A claim on a show floor sounds as firm as a published figure. It usually is not. Keep the same few questions in your pocket, and class what you hear.

Meeting planner

A meeting earns its time when both sides know the question before they sit down.

After the show

The value of a show is decided in the two weeks afterward, when notes turn into decisions or get lost.

How to cite this page. Delta Arc, LLC. “Australian Manufacturing Week 2027 planning reference.” DA-EV-australian-manufacturing-week-2027, version 1, as of 2026-11-06. https://thedeltaarc.com/events/australian-manufacturing-week-2027/

Published by Delta Arc, LLC · Editor: Michael Davis · Report a correction